Origin Technologies Corporation

The LaserGauge® supports automobile inspection applications from parts manufacturing all the way to final assembly, for both interior and exterior.

Gap and Flush - ExteriorGap and Flush Automotive Exterior
Inspection Problem: As vehicles are assembled, the fit-up of various parts is inspected by measuring the width of the gap between two adjacent panels and the alignment of the two surfaces, also called flushness. If the panels on either side of a gap are flat and if the edges have square corners or small radii,...

Gap and Flush - InteriorGap and Flush Automotive Interior
Inspection Problem: Interior components of a vehicle, such as the instrument panel and trim, are inspected for fit by the manufacturer and inspected after they are assembled in vehicles. Measuring gap and flush on these parts is difficult because of the unusual surface contours and...

App Laser Weld HS410Laser Welds
Inspection Problem: Sheet metal coils of different thickness are laser-welded together and cut into blanks. The blanks are used in stamping certain automotive parts. Using blanks that have variable thickness saves the cost and weight of the unneeded metal. Since the metal is...

Applications - Automotive - RadiusRadius
Inspection Problem: Automotive sheet metal parts must be stamped to exact dimensions for a vehicle to assemble properly. A radius stamped into the part and the location of the radius relative the part's edge, called the flange, must be precise for fit-up and aesthetic reasons. Small inside...